The contemporary styled D142 Series combines a cast aluminum housing, a spun aluminum shade, and an acrylic lens to create an efficient decorative luminaire. This fixture must be combined with a post top or wall mount bracket. A choice of lenses and reflectors are available. Some of the most popular models for use with this fixture are shown below.
The luminaire will mount to the bracket as shown on the reverse page. Post top luminaire brackets will mount to a 4 inch OD post or tenon with (6) 5/16 inch stainless steel set screws. Wall bracket models have four 3/8 inch holes for mounting (wall mount hardware is not Included).
The ballast is a High Power Factor (HPF), core and coil type, pre-wired and tested. The glazed white porcelain socket will be a medium base, 4kv Pulse rated with a copper alloy nickel plated screw shell and center contact. All components are UL recognized and will be an integral part of the luminaire. The luminaire will carry an ETL label "Suitable for wet location".
The fixture housing is cast aluminum. The 22" diameter shade is spun aluminum. The standard refractive lens is acrylic. All bracket and post top arms are 1 1/2 inch schedule 40 aluminum pipe (1.90 inch actual OD). The back plates or post top fitter will be constructed of cast or extruded aluminum.
The fixture will be finished with a premium quality thermoset polyester powercoat for a durable finish.
Premium Finish Options:
- GRN - Green
- TBK - Textured Black
- WHT - White
- BLK - Satin Black
- CLB - Classic Bronze
- GTG - Granite Green
- ATC - Antique Copper