High Performance, Made in USA LED Area Light, 36000 lumens

Item #
HPUSA300
  • Bronze
  • Black
  • White
  • Gray
  • Green
  • Silver
$799.00

Get A Free Quote

hpusa-logos.png

Full Customization Options

  • Housing Color: Bronze, Black, White, Gray, Green, Silver
  • Color Temperature: 3000, 4000 and 5000K
  • Distribution: 2, 3, 4 and 5
  • Voltage: 120-277 Volt, 345-480 Volt
  • Mounting Options: Universal Pole Mount, Slip-fitter, Wall Mount
  • Control Options: Photocell, Motion Sensor
  • Dimming: Dimmable (0-10V)
  • Cutoff Optics: Left, right and rear cutoff
  • Bluetooth: Fully customizable wireless control system. *Bluetooth available for additional surcharge. Please contact Sales to get a free quote. 

Construction

  • Rugged die-cast aluminum housing contains factory prewired driver and optical unit. Cast aluminum wiring access door located underneath.
  • Fixtures are finished with polyester powder coat finishing process. Finish withstands extreme weather changes without cracking or peeling.
  • Other standard finishes are available. Consult factory.
  • Shipping weight: 37 lbs.

Optical System

  • State-of-the-Art one piece silicone optic sheet delivers industry leading optical control with an integrated gasket to provide IP66 rated sealed
  • optical chamber in 1 component.
  • Proprietary silicone refractor optics provide exceptional coverage and uniformity in IES Types 2, 3, 4 and 5.
  • Silicone optical material does not yellow or crack with age and provides a typical light transmittance of 93%.
  • Zero uplight.
  • Available in 5000K, 4000K, and 3000K color temperatures per ANSI C78.377.
  • Minimum CRI of 70.
  • Integral louver and house-side shield options available for improved backlight control without sacrificing street side performance.

Electrical

  • High-performance programmable driver features over-voltage, under-voltage, short circuit and over temperature protection.
  • Custom lumen and wattage packages available.
  • 0-10V dimming (10% - 100%) standard.
  • Standard Universal Voltage (120-277 Vac) Input 50/60 Hz or optional High Voltage (347-480 Vac).
  • L80 Calculated Life: >100k
  • Total harmonic distortion: <20%
  • Operating temperature: -40°C to +50°C (-40°F to +122°F).
  • Power factor: >.90
  • Input power stays constant over life.
  • Field replaceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).
  • High-efficacy LEDs mounted to metal-core circuit board to maximize heat dissipation
  • Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.
Back
to Top